The following pictograms will be used on our products, packagings or enclosing product notes and will support the directive on product safety1).
Open and read the instructions |
Read attached instructions before use |
||
| Keep out of reach of children | Hold base of lamp when fitting, not bulb | ||
| Do not touch with bare fingers | Do not touch with bare fingers | ||
| No operation of lamps with scratched or damaged glass bulb | No operation allowed with broken outer envelope | ||
| Lamps with operating position limitations - only cap-down to horizontal operation is permitted | No disposal of as household waste | ||
| For indoor use only | Disconnect from power supply before re-lamping | ||
| Disconnect electronic device from power supply before servicing | Switch off light before changing the lamp | ||
| Self shielded lamp - can be operated in liminaires without protective shield | Operation only in luminaire installations with protective shield | ||
| Non-dimming | Beware of temperature | ||
| For removal and installation use appropriate gloves | For removal and installation use appropriate eye protection | ||
| Protect against direct water contact | Dichroic-coated reflector lamps - use only in suitable installations | ||
| Bowl mirror lamp - use only in suitable installations | Operating position limitations: p = horizontal, h = cap-up, s = cap-down, 15 = � 15� |
||
| Installation and servicing of electronic device only by qualified electrical employees | Lamp emits a high level of UV radiation | ||
| Germicidial lamp | Radiation hazard | ||
| Operation only with appropriate control gear | Lamps having an internal starting device | ||
| Lamps require an external ignitor | Dangerous voltage |
